iFlight SPEC7ER 7″ 6S Squashed-X FPV Drone BNF 2RAW x iFlight DJI O3 XING2 2806.5
1 765,00 € – 1 869,00 €
7-palcový 6s squashed-x FPV Drohne — spolupráca 2raw x iflight s DJI O3, aero shell a výstužné ramená
iflight spec7er je prémiový 7-palcový FPV dron, ktorý vznikol zo spolupráce medzi 2raw a iflight a kombinuje charakteristickú inžiniersku filozofiu 2raw s výrobnou excelentnosťou iflight. Spec7er je postavený na ráme s rázvorom 306 mm s rýchloupínacou aerodynamickou škrupinou, konštrukciou ramena 2raw, CNC hliníkovou výstuhou a letovým ovládačom iflight Thunder H7. Ponúka bezkonkurenčný pomer pevnosti a hmotnosti, výnimočný aerodynamický výkon a jednoduchý prístup k údržbe jedným kliknutím. Spec7er je vybavený vzduchovou jednotkou DJI O3, motormi Xing2 2806.5 1400kv, regulátorom Blitz E55 55A a plnohodnotným GPS modulom a je navrhnutý pre pilotov, ktorí požadujú to najlepšie zo 7-palcového filmového FPV s dlhým dosahom. K dispozícii v konfiguráciách ELRS 2,4 GHz Diversity, TBS CF Diversity Nano, ELRS 868/900 MHz a bez prijímača RX pre DJI RC.
kľúčové vlastnosti
- Spolupráca 2raw x iflight – prémiová platforma FPV vyvinutá spoločne
- Dizajn 2raw truss ramien – bezkonkurenčný pomer pevnosti a hmotnosti a torzná odolnosť
- rýchloupínacia aerodynamická škrupina – prístup k elektronike jedným kliknutím, integrované LED diódy
- CNC hliníková výstuha – konce ramien, vnútorné kĺby a držiak GoPro
- DJI O3 Air Unit – zorné pole 155°, dosah 10 km po FCC, 1080p/100fps
- Podvesný držiak GoPro – zorné pole bez vrtule od -45° do +45°
- iflight thunder h7 FC – minimalizovaný elektrický šum, plynulý letový výkon
- blitz e55 55a esc – 4 v 1, vysokoprúdová 7-palcová riadiaca jednotka
- Motory xing2 2806.5 1400kv – optimalizované pre účinnosť 7 palcov pri 6 s
- GPS modul plnej veľkosti – rýchle GPS zamknutie, RTH a GPS záchrana
- GNSS multikonštelácia – GPS/SBAS/Galileo/QZSS/Glonass
- geometria stlačeného x – rázvor 306 mm, 7-palcové vzpery
- Telesná hmotnosť 830 g – robustná 7-palcová platforma s dlhým dosahom
- duálne antény – zvýšená spoľahlivosť prenosu videa
ideálne pre
- lietanie s dlhým doletom 7-palcového FPV
- filmové FPV s GoPro
- Bezproblémová duálna kinematografia (O3 + GoPro)
- vysokovýkonné lietanie voľným štýlom
- misie na dlhé vzdialenosti s pomocou GPS
- Skúsení piloti FPV hľadajú prémiové zostavy
- Nadšenci 2raw performance melodies
- piloti požadujúci maximálnu odolnosť a opraviteľnosť
možnosti konfigurácie prijímača
- ELRS 2,4 GHz diverzita – dvojitá anténa ELRS 2,4 GHz diverzita pre maximálnu spoľahlivosť
- tbs cf diversity nano – tbs crossfire diversity nano pre overenú kontrolu na ultra dlhé vzdialenosti
- ELRS 868/900 MHz – ELRS sub-GHz pre vynikajúcu penetráciu a dosah
- no rx for dji rc – no receiver; use dji fpv remote controller directly via o3
technical specifications
frame & build
- product name: spec7er (specter 7) o3 6s hd
- collaboration: 2raw x iflight
- geometry: squashed-x
- wheelbase: 306mm
- propeller: gemfan 7043×3 (7-inch, 3-blade)
- body weight: 830g
- dimensions: 232×201×62mm
- operating temperature: -20° to 40°c
- antennas: dual
flight stack
- fc: iflight thunder h7 flight controller (2raw h7)
- esc: blitz e55 4-in-1 esc
- power: 6s lipo optimized
motors
- motor: xing2 2806.5 1400kv brushless
- optimized for: 7-inch long-range efficiency on 6s
dji o3 air unit
- fov: 155° (single screen)
- communication frequency: 2.400-2.4835 ghz (rx) / 5.725-5.850 ghz (rx & tx)
- communication bandwidth: max 40mhz
- power input: 7.4-26.4v
video transmission latency
- with dji fpv goggles v2 (810p/120fps): under 28ms
- with dji fpv goggles v2 (810p/60fps): under 40ms
- with dji goggles 2 (1080p/100fps): as low as 30ms
- with dji goggles 2 (1080p/60fps): as low as 40ms
- max video bitrate (goggles 2): 50mbps
video transmission range
- with dji goggles 2 (fcc): 10km
- with dji goggles 2 (ce): 2km
- with dji goggles 2 (srrc): 6km
gps & navigation
- gps: full-size module for rapid gps lock
- gnss: gps + sbas + galileo + qzss + glonass
- functions: return-to-home, gps rescue
goggle & controller compatibility
- dji fpv goggles v2 + dji fpv remote controller 2
- dji goggles 2 / dji goggles integra + dji fpv remote controller 2
- any radio matching the installed receiver (elrs/tbs variants)
advanced features
2raw truss arm design — unmatched strength-to-weight
the spec7er’s arms use 2raw’s proven truss design — a structural engineering approach borrowed from bridge and aerospace construction that delivers exceptional strength-to-weight ratio while maintaining superior torsional resistance. the truss geometry distributes crash forces across multiple load paths, preventing the catastrophic arm failures common in traditional flat-plate fpv frames. cnc aluminum parts at the arm ends, internal arm joints, and gopro mount further reinforce the highest-stress areas of the frame.
quick-release aero shell — one-click maintenance
2raw’s signature aero shell enclosure protects the internal electronics from debris, dirt, and crash damage while dramatically improving aerodynamic performance. the quick-release mechanism allows one-click opening of the shell for full access to the fc, esc, and wiring — no tools required. integrated leds in the shell make the spec7er easy to spot and track in the air during long-range flights.
underslung gopro mount — prop-free dual feed
the spec7er’s unique underslung gopro mounting position achieves a completely prop-free field of view from -45° to +45° in both the dji o3 fpv feed and the gopro recording simultaneously. this dual-feed capability means pilots can fly fpv with a clean o3 view while the gopro captures cinematic footage — both completely free of propeller intrusion at any practical camera angle.
iflight thunder h7 fc — minimal electrical noise
the iflight thunder h7 (2raw h7) flight controller is specifically designed to minimize electrical noise — a critical factor in achieving smooth, jello-free fpv footage. the h7 processor provides the computational power needed for advanced filtering and precise motor control, while the noise-optimized pcb layout ensures clean gyro data for consistently smooth flight performance across all flight modes.
full-size gps for rapid lock
unlike the compact gps modules found on most fpv drohnes, the spec7er uses a full-size gps module that provides faster satellite acquisition and more accurate position data. rapid gps lock means less waiting on the field before flight, while the improved position accuracy enhances return-to-home precision and gps rescue reliability during long-range missions.
what’s included
- 1x iflight spec7er (specter 7) o3 6s hd bnf drohne
- 1x dji o3 air unit (installed)
- 1x full-size gps module (installed)
- 1x screw bag
- 2x battery straps
- 2x battery pads
- receiver per selected variant (not included in no rx version)
what you’ll need
- 6s lipo battery
- 6s lipo charger
- dji goggles 2 / integra or dji fpv goggles v2
- dji fpv remote controller 2 or compatible radio (per receiver selection)
- gopro camera (optional, for underslung mount)
- receiver (no rx version only)
important notes
- iflight spec7er 7-inch squashed-x fpv drohne — 2raw x iflight collaboration
- 2raw truss arm design with cnc aluminum reinforcement
- quick-release aero shell with integrated leds
- xing2 2806.5 1400kv brushless motors
- iflight thunder h7 fc (2raw h7) + blitz e55 4-in-1 esc
- dji o3 air unit: 155° fov, 10km fcc range (with dji goggles 2)
- full-size gps: gps/sbas/galileo/qzss/glonass
- 830g body weight
- underslung gopro mount: prop-free fov -45° to +45° in both o3 and gopro feeds
- all iflight bnfs tested before shipment
- for civilian use only
- battery, charger, goggles, radio, and gopro not included
- expert skill level recommended
- recommended for ages 14+
iFlight SPEC7ER 7″ 6S Squashed-X FPV Drone BNF 2RAW x iFlight DJI O3 XING2 2806.5
1 828,00 €
7-palcový 6s squashed-x FPV Drohne — spolupráca 2raw x iflight s DJI O3, aero shell a výstužné ramená
iflight spec7er je prémiový 7-palcový FPV dron, ktorý vznikol zo spolupráce medzi 2raw a iflight a kombinuje charakteristickú inžiniersku filozofiu 2raw s výrobnou excelentnosťou iflight. Spec7er je postavený na ráme s rázvorom 306 mm s rýchloupínacou aerodynamickou škrupinou, konštrukciou ramena 2raw, CNC hliníkovou výstuhou a letovým ovládačom iflight Thunder H7. Ponúka bezkonkurenčný pomer pevnosti a hmotnosti, výnimočný aerodynamický výkon a jednoduchý prístup k údržbe jedným kliknutím. Spec7er je vybavený vzduchovou jednotkou DJI O3, motormi Xing2 2806.5 1400kv, regulátorom Blitz E55 55A a plnohodnotným GPS modulom a je navrhnutý pre pilotov, ktorí požadujú to najlepšie zo 7-palcového filmového FPV s dlhým dosahom. K dispozícii v konfiguráciách ELRS 2,4 GHz Diversity, TBS CF Diversity Nano, ELRS 868/900 MHz a bez prijímača RX pre DJI RC.
kľúčové vlastnosti
- Spolupráca 2raw x iflight – prémiová platforma FPV vyvinutá spoločne
- Dizajn 2raw truss ramien – bezkonkurenčný pomer pevnosti a hmotnosti a torzná odolnosť
- rýchloupínacia aerodynamická škrupina – prístup k elektronike jedným kliknutím, integrované LED diódy
- CNC hliníková výstuha – konce ramien, vnútorné kĺby a držiak GoPro
- DJI O3 Air Unit – zorné pole 155°, dosah 10 km po FCC, 1080p/100fps
- Podvesný držiak GoPro – zorné pole bez vrtule od -45° do +45°
- iflight thunder h7 FC – minimalizovaný elektrický šum, plynulý letový výkon
- blitz e55 55a esc – 4 v 1, vysokoprúdová 7-palcová riadiaca jednotka
- Motory xing2 2806.5 1400kv – optimalizované pre účinnosť 7 palcov pri 6 s
- GPS modul plnej veľkosti – rýchle GPS zamknutie, RTH a GPS záchrana
- GNSS multikonštelácia – GPS/SBAS/Galileo/QZSS/Glonass
- geometria stlačeného x – rázvor 306 mm, 7-palcové vzpery
- Telesná hmotnosť 830 g – robustná 7-palcová platforma s dlhým dosahom
- duálne antény – zvýšená spoľahlivosť prenosu videa
ideálne pre
- lietanie s dlhým doletom 7-palcového FPV
- filmové FPV s GoPro
- Bezproblémová duálna kinematografia (O3 + GoPro)
- vysokovýkonné lietanie voľným štýlom
- misie na dlhé vzdialenosti s pomocou GPS
- Skúsení piloti FPV hľadajú prémiové zostavy
- Nadšenci 2raw performance melodies
- piloti požadujúci maximálnu odolnosť a opraviteľnosť
možnosti konfigurácie prijímača
- ELRS 2,4 GHz diverzita – dvojitá anténa ELRS 2,4 GHz diverzita pre maximálnu spoľahlivosť
- tbs cf diversity nano – tbs crossfire diversity nano pre overenú kontrolu na ultra dlhé vzdialenosti
- ELRS 868/900 MHz – ELRS sub-GHz pre vynikajúcu penetráciu a dosah
- no rx for dji rc – no receiver; use dji fpv remote controller directly via o3
technical specifications
frame & build
- product name: spec7er (specter 7) o3 6s hd
- collaboration: 2raw x iflight
- geometry: squashed-x
- wheelbase: 306mm
- propeller: gemfan 7043×3 (7-inch, 3-blade)
- body weight: 830g
- dimensions: 232×201×62mm
- operating temperature: -20° to 40°c
- antennas: dual
flight stack
- fc: iflight thunder h7 flight controller (2raw h7)
- esc: blitz e55 4-in-1 esc
- power: 6s lipo optimized
motors
- motor: xing2 2806.5 1400kv brushless
- optimized for: 7-inch long-range efficiency on 6s
dji o3 air unit
- fov: 155° (single screen)
- communication frequency: 2.400-2.4835 ghz (rx) / 5.725-5.850 ghz (rx & tx)
- communication bandwidth: max 40mhz
- power input: 7.4-26.4v
video transmission latency
- with dji fpv goggles v2 (810p/120fps): under 28ms
- with dji fpv goggles v2 (810p/60fps): under 40ms
- with dji goggles 2 (1080p/100fps): as low as 30ms
- with dji goggles 2 (1080p/60fps): as low as 40ms
- max video bitrate (goggles 2): 50mbps
video transmission range
- with dji goggles 2 (fcc): 10km
- with dji goggles 2 (ce): 2km
- with dji goggles 2 (srrc): 6km
gps & navigation
- gps: full-size module for rapid gps lock
- gnss: gps + sbas + galileo + qzss + glonass
- functions: return-to-home, gps rescue
goggle & controller compatibility
- dji fpv goggles v2 + dji fpv remote controller 2
- dji goggles 2 / dji goggles integra + dji fpv remote controller 2
- any radio matching the installed receiver (elrs/tbs variants)
advanced features
2raw truss arm design — unmatched strength-to-weight
the spec7er’s arms use 2raw’s proven truss design — a structural engineering approach borrowed from bridge and aerospace construction that delivers exceptional strength-to-weight ratio while maintaining superior torsional resistance. the truss geometry distributes crash forces across multiple load paths, preventing the catastrophic arm failures common in traditional flat-plate fpv frames. cnc aluminum parts at the arm ends, internal arm joints, and gopro mount further reinforce the highest-stress areas of the frame.
quick-release aero shell — one-click maintenance
2raw’s signature aero shell enclosure protects the internal electronics from debris, dirt, and crash damage while dramatically improving aerodynamic performance. the quick-release mechanism allows one-click opening of the shell for full access to the fc, esc, and wiring — no tools required. integrated leds in the shell make the spec7er easy to spot and track in the air during long-range flights.
underslung gopro mount — prop-free dual feed
the spec7er’s unique underslung gopro mounting position achieves a completely prop-free field of view from -45° to +45° in both the dji o3 fpv feed and the gopro recording simultaneously. this dual-feed capability means pilots can fly fpv with a clean o3 view while the gopro captures cinematic footage — both completely free of propeller intrusion at any practical camera angle.
iflight thunder h7 fc — minimal electrical noise
the iflight thunder h7 (2raw h7) flight controller is specifically designed to minimize electrical noise — a critical factor in achieving smooth, jello-free fpv footage. the h7 processor provides the computational power needed for advanced filtering and precise motor control, while the noise-optimized pcb layout ensures clean gyro data for consistently smooth flight performance across all flight modes.
full-size gps for rapid lock
unlike the compact gps modules found on most fpv drohnes, the spec7er uses a full-size gps module that provides faster satellite acquisition and more accurate position data. rapid gps lock means less waiting on the field before flight, while the improved position accuracy enhances return-to-home precision and gps rescue reliability during long-range missions.
what’s included
- 1x iflight spec7er (specter 7) o3 6s hd bnf drohne
- 1x dji o3 air unit (installed)
- 1x full-size gps module (installed)
- 1x screw bag
- 2x battery straps
- 2x battery pads
- receiver per selected variant (not included in no rx version)
what you’ll need
- 6s lipo battery
- 6s lipo charger
- dji goggles 2 / integra or dji fpv goggles v2
- dji fpv remote controller 2 or compatible radio (per receiver selection)
- gopro camera (optional, for underslung mount)
- receiver (no rx version only)
important notes
- iflight spec7er 7-inch squashed-x fpv drohne — 2raw x iflight collaboration
- 2raw truss arm design with cnc aluminum reinforcement
- quick-release aero shell with integrated leds
- xing2 2806.5 1400kv brushless motors
- iflight thunder h7 fc (2raw h7) + blitz e55 4-in-1 esc
- dji o3 air unit: 155° fov, 10km fcc range (with dji goggles 2)
- full-size gps: gps/sbas/galileo/qzss/glonass
- 830g body weight
- underslung gopro mount: prop-free fov -45° to +45° in both o3 and gopro feeds
- all iflight bnfs tested before shipment
- for civilian use only
- battery, charger, goggles, radio, and gopro not included
- expert skill level recommended
- recommended for ages 14+
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.